Read How it Works before getting started
Have you seen the video tutorial?
By carefully selecting the placement of your viewpoints, you can create an experience that fully immerses your audience and showcases your design in the best light.
Enscape
Step 1: Start Enscape
Extensions->Enscape->Start Enscape
Step 2: Walk Mode
Navigate to where you would like the experience to start and enter Walk Mode.
Step 3: View Management
Enter the View Management tab and Create View.
Step 4: Create the first View
NOTE: View settings are optional if you render with our preferred format of .xml. Settings should only be used if you render as .jpg or .png.
Name your View with the prefix "DS_" and have it end in a number.
Example:
DS_myCameraName_001
DS_01
Adjust Camera Position
Y: 1.4
Pitch:
0.000°
Save Sun Position:
off
Step 5: Move to the next location
Using WASD on your keyboard, walk to the next location you would like to place a View.
Step 6: Create a second View
NOTE: View settings are optional if you render with our preferred format of .xml. Settings should only be used if you render as .jpg or .png.
Name your View with the prefix "DS_" and have it end in a number.
Example:
DS_myCameraName_002
DS_02
Adjust Camera Position
Y: 1.4
Pitch:
0.000°
Save Sun Position:
off
Step 7: Repeat for every View
Keep moving around your scene creating Views.