Skip to main content
All CollectionsRhinoEnscape for Rhino
Step 1: Set up Views with Enscape for Rhino
Step 1: Set up Views with Enscape for Rhino
Updated over a week ago

Read How it Works before getting started

By carefully selecting the placement of your viewpoints, you can create an experience that fully immerses your audience and showcases your design in the best light.


Notes


Enscape

Enable the Enscape toolbar

  • Right Click Toolbar->Show Toolbar->Enscape

Step 1: Start Enscape

Step 2: Walk Mode

  • Navigate to where you would like the experience to start and enter Walk Mode.

Step 3: View Management

  • Enter the View Management tab and Create View.

Step 4: Create the first View

NOTE: View settings are optional if you render with our preferred format of .xml. Settings should only be used if you render as .jpg or .png.

  • Name your View with the prefix "DS_" and have it end in a number.

  • Example:

    • DS_myCameraName_001

    • DS_01

  • Adjust Camera Position

    • Y: 1.4

  • Pitch:

    • 0.000°

  • Save Sun Position:

    • off

Step 5: Move to the next location

  • Using WASD on your keyboard, walk to the next location you would like to place a View.

Step 6: Create a second View

NOTE: View settings are optional if you render with our preferred format of .xml. Settings should only be used if you render as .jpg or .png.

  • Name your View with the prefix "DS_" and have it end in a number.

  • Example:

    • DS_myCameraName_002

    • DS_02

  • Adjust Camera Position

    • Y: 1.4

  • Pitch:

    • 0.000°

  • Save Sun Position:

    • off

Step 7: Repeat for every View

  • Keep moving around your scene creating Views.


Next

Did this answer your question?